中空玻璃加工設備如何保養才正確
中空玻璃加工設備在使用中的保養非常簡單，主要是保持滑輪各方面的潤滑，保持電壓的穩定，防止電器的燒毀。為保證機器的良好運行，應加強機器日常維護與保養，在運行過程中若有異常情況應立即停車檢查。排除故障后再重新啟動。設備出現較大的的故障時應有經驗的人士來維修，在開始檢修前切忌關掉總電源。
The maintenance of insulating glass processing equipment in use is very simple, mainly to maintain the lubrication of pulley in all aspects, maintain the stability of voltage and prevent the burning of electrical appliances. In order to ensure the good operation of the machine, it is necessary to strengthen the daily maintenance and maintenance of the machine. If there is any abnormal situation in the operation process, the machine should be stopped immediately for inspection. Restart after troubleshooting. In case of major equipment failure, experienced personnel shall be responsible for maintenance. Do not turn off the main power supply before maintenance.
1.傳動維護：各傳送輥軸承、毛刷輥軸承、傳送軸承、鏈輪、齒輪定期加注鈣基潤滑脂；微型擺線針輪減速機每半年加鈣基潤滑脂一次；無級調速器每半年換Ub—l或Ub—3型潤滑油一次，且在運轉過程中應時常檢查其油位，保持油位在滑標線以上。
1. Transmission maintenance: calcium base grease shall be added regularly to each transmission roller bearing, brush roller bearing, transmission bearing, sprocket wheel and gear; calcium base grease shall be added to the micro cycloid pin gear reducer once every half a year; ub-l or ub-3 lubricating oil shall be changed for stepless governor every half a year, and the oil level shall be checked frequently during operation to keep the oil level above the center line of sliding mark.
2.水路維護：水箱內循環水應每天更換，水箱每周清洗一次，經常檢查噴水嘴噴水情況，項發現堵塞應及時清理。
2. Waterway maintenance: the circulating water in the water tank should be replaced every day, and the water tank should be cleaned once a week. The water spraying condition of the spray nozzle should be checked regularly. If any blockage is found, it should be cleaned up in time.
3.風路維護：定期檢查風機運行情況，如有異常聲音應立即停機檢查，定期清洗風機過濾柵，減小引風阻力，提高風干后玻璃表面潔凈度。
3. Air path maintenance: check the operation of the fan regularly. If there is abnormal sound, stop the fan immediately for inspection. Clean the filter screen of the fan regularly to reduce the induced air resistance and improve the cleanliness of the glass surface after air drying.
以上就是濟南雙組份打膠機為您介紹的關于中空玻璃設備的相關內容，希望客戶幫助到您!如您有更多的疑問可以關注公司網站：http://m.5imanhua.com會有在線客服為您進行解答。
The above is about the insulating glass equipment introduced by Jinan two-component gluing machine. We hope customers can help you! If you have more questions, please pay attention to the company's website: http://m.5imanhua.com There will be online customer service for you to answer.
上一篇：選擇中空玻璃生產線的注意事項
下一篇：雙液澆注機如何防止膠水沉淀?
